The Lost Mary BM6000 is one of the most popular prefilled pod vape kits in the market today. With its smooth performance, rechargeable battery, and large puff capacity, it’s designed for convenience and great flavor delivery. But many vapers often ask the same question — “Can I refill my Lost Mary BM6000?”
The answer is yes, with a bit of care and the right technique. In this guide, you’ll learn how to refill your Lost Mary BM6000 safely, how to get the best performance from it, and what to watch out for to extend the life of your device.
Understanding the Lost Mary BM6000
The Lost Mary BM6000 Prefilled Pod Vape Kit comes preloaded with e-liquid and offers up to 6000 puffs. It’s rechargeable via USB-C and uses a mesh coil system, which enhances flavor and vapor consistency.
While it’s marketed as a prefilled system, some users prefer refilling it once the pod runs out, to get a little more life from their kit or try a different flavor.
Before refilling, keep in mind that the device is not officially designed for multiple refills, so it’s important to follow a careful process to avoid leaks or coil damage.
What You’ll Need to Refill Your Lost Mary BM6000
To refill safely, prepare the following items:
Your Lost Mary BM6000 device
A compatible wholesale e-liquid (preferably nicotine salt for smooth delivery)
A small dropper or syringe for precise filling
A clean tissue or paper towel
Optional: a small flat tool or tweezers to help open the pod seal
Step-by-Step: How to Refill the Lost Mary BM6000
Step 1: Prepare Your Device
Make sure your device is powered off and disconnected from the charger. Clean the outer surface to remove any residue or e-liquid before starting.
Step 2: Remove the Mouthpiece or Top Cap
Gently twist or pull off the mouthpiece from the top of the pod. You’ll notice a small rubber plug or silicone seal — this covers the fill port where the e-liquid goes in.
Step 3: Locate the Fill Port
Lift the silicone plug carefully using tweezers or your fingernail. Underneath, you’ll see a small opening designed to fill the pod. Be sure to hold the device at a slight angle to prevent air bubbles or overflow during filling.
Step 4: Add Your E-liquid
Using your dropper or syringe, slowly add e-liquid into the pod. Don’t fill it to the very top — leave a small air pocket to avoid pressure buildup and leaking. Around 2ml to 3ml is usually sufficient for one refill.
Step 5: Reseal and Clean
Once filled, close the silicone plug tightly and wipe away any excess e-liquid. Make sure the pod is clean and dry before reattaching the mouthpiece.
Step 6: Prime the Coil
Before using your device again, let it sit for 5–10 minutes. This allows the coil to absorb the e-liquid properly, preventing burnt hits or dry spots.
Step 7: Test the Device
After waiting, take a gentle puff to check flavor and vapor production. If everything feels smooth, your wholesale Lost Mary BM6000 is successfully refilled and ready to go.
Tips for Better Performance
Here are a few tips to make your refill last longer and perform better:
✅ Use nic salt e-liquids with a 50/50 VG/PG ratio for optimal wicking.
✅ Avoid overfilling — this can cause leaks or flooding inside the pod.
✅ Store your vape upright to prevent e-liquid pooling at the base.
✅ Clean the mouthpiece and airflow holes regularly for smooth draws.
✅ If the flavor fades or tastes burnt, it’s time to replace the pod or device.
Common Mistakes to Avoid
Overfilling: Filling beyond the pod’s capacity can cause leaking or poor vapor.
Using Thick E-liquid: High-VG juices can clog the coil quickly.
Skipping Coil Priming: Vaping immediately after filling can burn the cotton wick.
Pulling Too Hard: Gentle puffs help preserve the coil and avoid flooding.
How Many Times Can You Refill the BM6000?
While the Lost Mary BM6000 isn’t built for continuous refilling, most users can refill it 1–3 times before the coil starts to weaken. After that, vapor quality and flavor intensity naturally decrease, so replacing the pod or device is recommended.
If you find yourself refilling often, consider switching to a refillable pod system or purchasing replacement prefilled pods for a more consistent experience.
Final Thoughts
Refilling the Lost Mary BM6000 is a great way to get more value and flexibility from your device — as long as you do it carefully. With the right tools, a steady hand, and a bit of patience, you can enjoy extra puffs and experiment with different e-liquid flavors.
However, always remember that the BM6000 was designed for limited use. For long-term vaping, explore refillable pod systems that are built for ongoing use and customization.
