Electric kettles and jugs have become an essential part of modern kitchens. They offer convenience, speed, and safety in boiling water for tea, coffee, or other needs. However, with this convenience comes the responsibility to ensure that these appliances meet proper safety and quality standards. In India, this responsibility lies with the Bureau of Indian Standards (BIS), which regulates and certifies products through its various schemes.
In this blog, EVTL India will guide you through the complete process of BIS for electric kettles and jugs, the importance of the ISI mark, and how a BIS consultant can make this process smoother for manufacturers and importers.
Why BIS Certification is Mandatory for Electric Kettles and Jugs
The BIS certification for electric kettles and jugs is mandatory under the Compulsory Registration Scheme (CRS) governed by the Ministry of Electronics and Information Technology (MeitY). These appliances fall under electronic safety equipment and must meet Indian safety standards before they are sold in the Indian market.
The certification is essential to:
Ensure consumer safety from electrical hazards
Maintain quality standards across brands and models
Prevent sale of sub-standard or counterfeit products
Build trust among consumers
Enable manufacturers to access the Indian market legally
If a manufacturer or importer fails to obtain this certification, their products may be banned from sale, seized, or penalized under Indian law.
Standards Applicable to Electric Kettles and Jugs
For electric kettles and jugs, the relevant standard is IS 302 (Part 2/Section 15). This Indian Standard specifies the safety requirements, testing procedures, and labeling norms that must be followed by manufacturers. BIS ensures that the products comply with this standard before granting certification.
What is the ISI Mark for Electric Kettles and Jugs?
The ISI mark is a quality assurance symbol issued by the Bureau of Indian Standards. When an electric kettle or jug carries the ISI mark, it means the product has been tested and approved as per Indian safety standards.
The ISI mark:
Acts as proof of product safety
Ensures that the manufacturing process is controlled and monitored
Helps consumers make informed purchase decisions
Prevents the circulation of faulty or hazardous products in the market
In the case of electric kettles and jugs, the ISI mark can only be used once the manufacturer gets BIS certification after a thorough product and factory inspection.
Who Needs BIS Certification?
BIS certification is required by:
Indian manufacturers producing electric kettles and jugs
Foreign manufacturers exporting these appliances to India
Importers and brand owners who want to sell under their brand in India
Even if you import the product in bulk and rebrand it, the product must comply with BIS norms and carry the ISI mark before it is sold to customers.
Step-by-Step Process of BIS Certification for Electric Kettles and Jugs
At EVTL India, we help companies navigate the BIS certification process efficiently. Here’s how the process generally works:
1. Product Testing in BIS-Recognized Lab
Before anything else, the electric kettles or jugs need to be tested at a BIS-approved laboratory. The product is tested for performance, safety, and material compliance according to IS 302 Part 2 Section 15. The test reports are crucial for the next step.
2. Application Submission
Once the product has passed testing, the manufacturer or their BIS consultant submits the application to BIS along with:
Test reports
Factory documents
Authorization letter (if using consultant)
Undertaking and declarations
Fee payment
3. Factory Inspection (for Indian manufacturers)
For Indian manufacturers, BIS officials may inspect the factory to ensure that:
Adequate quality control measures are in place
Equipment and testing facilities meet the norms
Manufacturing process is consistent and safe
Foreign manufacturers under the FMCS (Foreign Manufacturers Certification Scheme) are also required to go through a similar audit.
4. Grant of Certification and Use of ISI Mark
Once BIS is satisfied with the application, documents, and factory setup, it issues the BIS license. The manufacturer can now affix the ISI mark on the product and packaging.
The license is generally valid for 2 years and must be renewed periodically.
Role of a BIS Consultant for Electric Kettles and Jugs
The BIS certification process can be complex, especially for first-time applicants or foreign manufacturers. This is where a BIS consultant comes in.
A BIS consultant for electric kettles and jugs helps with:
Understanding applicable Indian standards
Preparing all documents required for BIS submission
Coordinating product testing in approved labs
Handling communication with BIS officials
Arranging factory inspection readiness
Ensuring faster and smoother certification
At EVTL India, we have assisted hundreds of Indian and global manufacturers in achieving timely BIS approval for their electronic appliances. We understand the process in detail and work closely with clients from document preparation to final certification.
Common Challenges Faced During BIS Certification
Some of the challenges manufacturers face include:
Incorrect product classification
Incomplete or invalid documentation
Failure in lab testing
Delay in factory inspection
Lack of awareness of standard updates
With expert support from experienced BIS consultants, these challenges can be avoided or quickly resolved.
Why Choose EVTL India as Your BIS Consultant?
EVTL India is a trusted BIS consultant for electric kettles and jugs in India. Here’s why businesses choose us:
Years of experience in BIS and ISI certification
Dedicated team for electronics and household appliances
End-to-end support, from testing to approval
Quick turnaround time and regular status updates
Affordable and transparent service packages
Personalized consultation for every client
We simplify the BIS certification journey so you can focus on your business growth and product quality.
Final Thoughts
EVTL India is one of the leading BIS Consultant in India, helping manufacturers obtain their BIS licences hassle-free. Getting BIS certification for electric kettles and jugs is not just a regulatory requirement; it is a sign of commitment toward consumer safety and product excellence. Whether you are a manufacturer, importer, or brand owner, compliance with Indian standards gives your product legal entry and competitive edge in the Indian market.
EVTL India is always ready to support you with expert guidance, timely documentation, and full assistance in getting your electric kettles and jugs BIS certified.
